Use this accessory on 10K or 12K HALL winches if you wish to use the HALL Synthetic Rope accessory.

Use this accessory to mount the 10K or 12K HALL winch to your vehicle. Mounts to the front of most trucks or SUVs.

Use this accessory to mount the 10K or 12K HALL winch to your vehicle's receiver hitch.

• 10,000-lb. pulling capacity
• 12V DC, 6 HP series-wound motor 
• Automatic load-holding brake 
• Auto cable tensioner 
• Aircraft grade galvanized steel wire rope 
• 11.5 ft wired ergonomic handheld remote control​
• Water resistant construction – IP 66 Rating​

• 12,000-lb. pulling capacity for off-road vehicle recovery
• 12V DC, 6 HP series-wound motor 
• Automatic load-holding brake 
• Auto cable tensioner 
• Aircraft grade galvanized steel wire rope 
• 11.5 ft wired ergonomic handheld remote control​
• Water resistant construction – IP 66 Rating​

• 2,500-lb. pulling capacity for ATV recovery
• 12V DC, 1.1 HP series-wound motor 
• Automatic load-holding brake 
• Dynamic brake
• Aircraft grade wire rope 

This synthetic rope is lighter (and of equal or greater strength) than standard winch lines. Compatible with HALL 10K and 12K winches.

Use this accessory to mount the 2.5K HALL winch. Mounts to the front of ATVs and UTVs that don't have built-in mounting plates.

Go wireless with this HALL winch accessory. The remote controls that come with HALL winches are wired, tethering you to the vehicle. But with the Wireless Remote you can operate the winch from up to 80 feet away.